|
|
Processing Lines Available For Remanufacturing NOW!
For more information or a quote contact:
Ralph Becker
| |
Coil Handling Equipment
FEEDERS, PRESS
60" x .020"-.250”, complete line with digital feed, 1985
FEEDING & STRAIGHTENING MACHINERY
66"-76" x .125"-.500”, auto, digital
Cut-To-Length Lines
72" x .375" , Engineered, payoff, leveler, shear, stacker
74”, 60000 lb. cap., digital precision feed, uncoiler
80" x 1”, 80000 lb., uncoiler, peeler, leveler, shear, stacker
96" x .500”, pay-off, peeler, flattener, leveler, shear, stacker, floor run-out conveyor.
96" x .625”, 80000 lb., uncoiler, peeler, leveler, shear, stacker
Levelers: Roller Type, Flatteners, Corrective, & Corrective Backed Up with Roll Bend
16" x 144”, backed-up for .176" to 5" thick plate
23" x 168”, backed-up for .500 to 6-1/2" thick plate
66" x 1/2" to 5”, see in operation
72" x 5/8” & 48" x 1/2" Levelers
76" x 4"-10”, leveler/flattener, enclosed gears, universal drives
96" x 4"-10”, leveler/flattener, enclosed gears, universal drives
136" x 1/2" to 5”, see in operation
( go top of page )
Rolling Mills
ROLLING MILLS, 2 HI
12" x 20”, uncoiler, recoiler, edging, hydraulic screw-downs
20" x 30”, with hydraulic screw-down, complete
27" x 66”, large separating force & enclosed gears, hydraulic screw-downs
42" x 84”, large separating force & enclosed gears, hydraulic screw downs
ROLLING MILLS, 4 HI
7" x 20" x 28”, w/terminal equipment
16” – 36” x 60” complete for aluminum products
16” x 36” x 36” for sputtering targets
28” x 36” x 36” for powdered metal to strip
( go top of page )
Rolls, Plate Bending, Initial & Double Pinch Type
12' x 4.5", 24” x 144”, 4-roll, AC, 150 HP, PLC controls
( go top of page )
Slitting Lines
72" x 1/2", 60000#,payoff,slitters,10" & 13"arbors,scrap winder,recoiler
76", 60000 lb., payoff,slitter,recoiler,winders,tooling,tension stand
60" x .250 x 7" arbor x 20 ton, 20"/24" ID, looping table
( go top of page )
Tube and Pipe Mills
3” x .136” (76mm x 3.5mm) Scill with tooling for round and square
6.625” x .375” (168mm x 9.5mm) Scill with tooling for round and square
8.625” to 2”, 7-roll Cross Axis Sutton straightener with quick opening
12” x .500” (305mm x 12.7mm) complete plant for pipe with hydrostatic tester
96” x .500” Spiral Pipe Mill, complete plant available
( go top of page )
Press Feed Lines
1500 Ton X 60” X 144” Clearing, w/windows, 40 SPM with feed line
1000 Ton X 60” X 120” Clearing, 40 SPM with feed line
( go top of page )
Pickle Lines
72” X .375” X 30 Ton, complete plant
( go top of page )
Press Brakes
2300 Ton X 55’, for making tapered poles and towers
( go top of page )
Tapered Pole & Tower Equipment
2” to 10”, with cutting and forming equipment
20” to 66” x .500” wall for making tapered windmill towers
( go top of page )
|
|
Contact: American Steel Products Co., Sylvania, Ohio, USA
419-841-1599 (Fax 419-843-5288) Email: Ralph Becker
|